Skip to product information

Furygan Airbag vest Evolution+ Black

€399,00
€399,00
Tax included.
Size
Is your size not available? Contact us and we can order it for you!

The Fury Airbag Evolution+ combines all the benefits of the Fury Airbag EVO with the Furygan In&Out concept to create this ‘+’ version, which can be used under or over your motorbike clothing. A new step in biker protection, this evolution of our abrasion-resistant airbag waistcoat, enhanced by a level 2 D3O® back protector, redefines market standards.

Still powered by intelligent, self-learning In&motion technology, its protective performance has been enhanced by a new inflation pocket. With its featherweight, slim design and ultra-ventilation, it is the new benchmark for motorbike airbags. Active protection that’s as discreet as it is high-performance, so you’ll forget you’re wearing it on the road, trails and circuits.

Good to know

  • The lightest electronic airbag ever designed by Furygan.
  • Percentage of ventilated surface: 100%.
  • In&motion subscription required. Go to shop.inemotion.com
  • The first inflator is included with the airbag.
  • In&box recharge time: 2 hours.
  • Approved by the FIM for use in all short circuits championships except MotoGP and JuniorGP.

For In&motion membership info, visit: https://www.inemotion.com/myinemotion/en/moto-membership

The right size

Choosing the right size and making sure that the vest is correctly adapted to your body is essential to ensure an optimal functioning of your airbag.

The Furygan airbag vest must be worn and adjusted correctly, so that the protection zones are perfectly in place. However, it is possible that you may want to choose another size according to your preferences.
XS
S
M
L
XL
XXL
3XL
4XL
CHEST
84-88
90-94
96-100
102-106
108-112
114-118
120-124
126-130
CUTTING TOWER
78-82
84-88
90-94
96-100
102-106
108-112
114-118
120-124

How do I know if my jacket/suit is compatible?

Not resistant to abrasion, the Furygan airbag vest must be worn under a suit, a jacket or a motorcycle jacket to fulfill its role perfectly. Any doubt about the compatibility of your favorite jacket? All the answers are below.

In the case of wetsuits, you have to make sure that your product has been declared compatible by In&motion.

To check that your jacket is compatible with the airbag vest, you need to take measurements. You can check yourself the compatibility of your jacket by following the protocol below.

Step 1: User measurements without the vest

The following measurements should be taken without wearing the airbag vest:

  • A Measure your chest circumference in cm
  • B Measure your waist circumference, in cm
  • C Add these 2 measurements, then divide the result by 2 (ex: 100+90=190 and 190/2=95 cm)
Step 2 : Measure your jacket

The following measurements are made by stretching the jacket.
All elastic fabrics and elasticated parts in the direction of the measurement must be well stretched.
Place your closed jacket on a flat surface.

  • A While stretching the jacket until the elastic parts and fabrics are tight, measure the width of the jacket under the armpits in cm. (ex : 58 cm)
  • B Similarly, while stretching the jacket, measure the width of the jacket at the navel in cm. (ex : 52 cm)
  • C Add these 2 measurements (ex: 58+52=110 cm)
Your jacket is compatible with the vest if the difference between the result obtained in step 2 and that obtained in step 1 is greater than or equal to 13cm.
Example : 110-95=15 cm. Your vest is compatible.

A = Jacket width under armpits
B = Chest circumference with the equipment that will be worn when using the product (without the airbag waistcoat)

● Step 1 – Measure A
● Step 2 – Calculate 2 x  A
● Step 3 – Subtract B from the result of step 2 to obtain the measurement M

➜ If M is less than 13 then your equipment is incompatible
➜ If M is greater than or equal to 13 then your equipment is compatible

⚠ ATTENTION: Measurements are taken with the equipment that will be worn when using the airbag product (jumper, additional protection, removable lining, etc…)
⚠ ATTENTION: Measurements should be taken with the jacket stretched.

Motorcycle equipment (textiles or leather) is elastic and deforms (with use, the sun, your movements, etc.) allowing the airbag to find the space it needs to deploy at optimum pressure and absorb the energy of the impact.

The In&motion airbag system can therefore be worn under any motorbike jacket as long as you follow the procedure above to make sure there’s enough room for the airbag to deploy.

AIRBAG AND backpack

The In&motion airbag system is compatible with a backpack. For this, it is important to respect the following conditions:

The total weight of the backpack must not exceed 8kg.

Never use the backpack straps if it is equipped with them (chest and abdomen).

  • The shoulder straps must not interfere with the deployment of the airbag. When pulling the straps forward, there should be a distance of 10 cm between the straps and the front of the shoulder.
  • The total weight of the bag should not exceed 8 kg.
  • The use of straps to support the abdomen and chest is prohibited.
  • The shoulder straps must not interfere with the deployment of the airbag. When pulling the straps forward, there should be a distance of 10 cm between the straps and the front of the shoulder.

Position the backpack properly on the shoulders and back, and over a compatible motorcycle jacket.

GPSR Information

Manufacturer Information

Name: T Outfitters GmbH

Address: Römerstraße 3, 5322 Hof bei Salzburg, Austria

Email: klimeurope@klim.com

Website: https://www.klim.com/

European Manufacturer: Yes