Enduristan Monsoon EVO Side Panniers

The Monsoon Evo is sold individually.

The new generation of semi-rigid luggage has arrived! Our team of engineers worked for almost two years with British rally driver and adventurer Lyndon Poskitt to develop and test our Monsoon Evo panniers in real conditions and on all terrains. The specifications were simple: design and manufacture semi-rigid, waterproof, lightweight side panniers that are easy to install and above all rock-solid. Mission accomplished!

The Monsoon Evo allows you to travel as lightly as possible, thanks to their unbeatable unladen weight of 2.55 kg for size S and 2.75 kg for size L.

There is no need to fit an adapter plate on the side frames: the Monsoon Evo has an integrated attachment system that fits directly onto the side frame hoops. The Monsoon EVO can be fitted to any 18 mm tubular side frame.

The diagram shown in the last photo will enable you to check that your rack is compatible. Check the actual diameter of the tubes, it is possible that racks advertised as being 18 mm may in fact be thicker due to an epoxy coating or other.

The panniers are held in place at the top by two adjustable straps. This clever system also makes it possible to install the panniers on a bevelled side support, for example, which follows the shape of the exhaust.

The Monsoon Evo is available in two sizes: 24 or 34 litres. The panniers are sold individually and can be mounted on either the left or right side of the motorbike. They are interchangeable. These two sizes allow you to find the perfect combination for each motorbike, for example by installing the 24-litre S version on the exhaust side and the 34-litre L version on the other side.

Each Monsoon Evo pannier can carry a load of 8 kilos maximum.

The Monsoon Evo are obviously completely waterproof, like all our products! No need to worry about mud, sand, rain or snow: your belongings will stay nice and warm and perfectly protected.

These panniers are made for adventure around the world. The materials used will withstand whatever surprises the road may hold. The main material is our usual three-layered fabric, highly resistant to abrasion and completely waterproof. The fastenings on the hoops of the side supports are made of reinforced composite fibres. Finally, a slider, also made of fibres, has been added to the outside, so that it touches the ground first in the event of a fall or slide.

A supplied safety pin prevents the system from unlocking accidentally, even in the most demanding off-road conditions.

This pin can be replaced by a padlock (not supplied). The Monsoon Evo can be locked to the side supports with a padlock not supplied but available in all good hardware stores (ABUS 85/30HB65 format for example). The idea is to allow you to easily replace this security device anywhere in the world.

It is possible to add accessories to the two small sides of each pannier:

• SMALL 24 L: one or two bottle holders or universal cases can be placed on one side, and an S mudguard bag on the other.
• LARGE 34 L: one or two bottle holders or universal cases can be placed on one side, and an L mudguard bag on the other.
  

Caution: do not mount the panniers directly next to a heat source such as a manifold or exhaust pipe. If the panniers are too close to a heat source, install the Inferno heat deflector to protect them. It is sometimes necessary to install two Inferno heat deflectors per side due to the high heat produced by the exhaust pipe or manifolds. An easy rule to remember: if it's too hot for your hand, it will be too hot for the panniers.

An adapter allows the panniers to be installed on the original BMW GS and GIVI mounts.

Two sizes are available:

Monsoon Evo SMALL 24 L / Unit price 340 EUR

• Volume 24 litres
• Width 40 cm
• Height 40 cm
• Depth 16 cm
• Weight 2.55 kg

Monsoon Evo LARGE 34 L / Unit price 370 EUR

• Volume 34 litres
• Width 40 cm
  
• Height 40 cm
• Depth 21 cm
• Weight 2.75 kg

Characteristics

Made from a three-layer heat-sealed synthetic fabric and shockproof PVC:

1. Impact-resistant PVC reinforcement to protect the contents from flying stones or branches
2. Waterproof red vinyl inner layer for easy viewing of the contents of the bag
3. Tear-resistant 1000D nylon mesh middle layer
   
4. Outer layer in extremely abrasion-resistant polymer

Details:

• No loose straps
• Fits all 18-millimetre tubular racks
• Extremely strong hooks on the side rack
• Protective slider
• Easy to detach from the system in a few seconds
• Can be used on either side of the motorbike
• Perfectly waterproof
• Clip-on roll-up closure
  
• 4 compression straps
• 4 options on the short sides for attaching a bottle holder, universal pouch or pannier.
• 2 rows of sewn-on straps at the top for attaching additional equipment
• Ergonomic carrying handles
  
• Can be locked with an ABUS 85/30HB65 padlock (not supplied)
• Easy to clean

The plastic inner reinforcement should be installed in the opposite direction to its curvature. The Velcro on the reinforcement should stick to the Velcro on the bottom of the case. This allows the plastic reinforcement to press against the walls of the case and keep it in good shape.

Accessories not supplied and available separately

• Shoulder strap, one strap per pannier is recommended
• Inferno heat deflector
• Can hold up to 6 internal storage bags
• To be installed on the short sides: bottle holder / universal case / mudguard bag L